A full 12-channel amplifier with an integrated 12-channel DSP. 6 channels of RCA inputs, 12 high-level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD optional input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. 12 amplified speaker level outputs with staggered power 8x50W RMS @ 4 Ohm + 4x100W RMS @ 4 Ohm, full 12-channel RCA 4V pre-outs. Perfect for multi-stage n-way systems, upgrades to OEM multichannel systems where you want a solid foundation. The staggered power on channels 1-8 compared to 9-12 allow for more optimized output setup for complex active systems to not lose the bit-resolution from lowering the volume on smaller speakers (tweeters, mids, widebands, fills). A multipurpose do-it-all DSP amplifier with comprehensive connectivity that can be at the core of any proper SQ system.
The DSP supports the following on every output channel:
- High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
- 31 band fully parametric EQ with +/-15 dB correction
- Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of channel pairs
- Phase phase switching between 0 and 180 degrees
- Level correction from 0 to -40 dB, optional linking of channel pairs
- Freely selectable mixing of all input channels to every output channel with the option of phase inversion of single input channels, allowing the set up of a differential rear fill
- Internal pink noise generator to test each individual output channel
Configuration software for Microsoft Windows: DOWNLOAD HERE
Manufacturer provided specs:
- Power supply voltage: 9-15 VDC
- Remote IN voltage: 6-15 VDC
- Bandwidth @ -3 dB: 10Hz-20kHz
- THD @ 1 kHz, 1V RMS Output: 0.05%
- Output power at 1% THD-N: 8x 50W RMS @ 4 Ohm + 4x 100W RMS @ 4 Ohm
- S/N Ratio full power A-: 100dB
- Inputs: 6xRCA analogue, 1x RCA SPDIF coax, 1x TOSLINK SPDIF, 12x high-level, optional Bluetooth 5.0 AptX HD module
- Outputs: 12x Speaker level amplified, 12x RCA pre-outs
- Control connections: 1x USB 1.1/2.0, optional wired remote (DRC)
- 8 full setup presets
- Auto on via high level signal detect or remote input
- Dimensions: 307x196x50 mm
What's included:
- 1x DSP Amplifier unit
- 5m USB A-B cable
- 2x High-level input harnesses
- 2x Speaker output harnesses
- Mounting brackets and fasteners
- 1x Instructions