A surprisingly compact 12-channel amplifier with a new generation 12-channel DSP. 6 channels of RCA inputs, 12 high-level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD input, digital remote control for volume, sub level, preset selection, input selection, mute trigger. 12x50W RMS @ 4 Ohm output channels (at <1% THD+N), 12-channel RCA output, this DSP amp has it all. Perfect for 3-way active front + active rear amplification with an external subwoofer amplifier or 4 Ohm subwoofer on bridged channels 11 and 12 (yes, these are bridgeable even if undocumented). The powerful multichannel input EQ, time alignment and allpass filtering allows for proper OEM integration. A compact, dense multichannel DSP amplifier with very powerful DSP functionality for full integration in the modern multichannel active systems. Infinitely expandable to use high-end external amps via its 8V RCA outs on every channel - you can also use this DSP amp as a standalone DSP if need be. It's truly an universal all-in-one unit!
The DSP supports the following on every output channel:
- High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
- 31 band fully parametric EQ with +/-15 dB correction, Q-value 0.3 to 15
- 1st and 2nd order Allpass filters with Q control and inversion (each of the 31 EQ bands can be switched to Allpass)
- Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of channel pairs
- Phase phase switching between 0 and 180 degrees
- Level correction from 0 to -40 dB, optional linking of channel pairs
- Fully functional input mixer, live mixing of inputs (2 inputs active in parallel), allows the set up of a differential rear fill
- Internal pink noise generator to test each individual output channel
The input of the DSP supports the following corrections on every input channel, including the COAX, TOSLINK and Bluetooth, separately:
- High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
- 10 band fully parametric EQ with +/-15 dB correction, Q-value 0.3 to 15
- 1st and 2nd order Allpass filters with Q control and inversion (each of the 10 EQ bands can be switched to Allpass)
- Time delay up to 15 ms for time alignment, selectable in ms, cm or inches
- Phase phase switching between 0 and 180 degrees
- Level correction from 0 to -40 dB
Configuration software for Microsoft Windows: DOWNLOAD HERE
Manufacturer provided specs:
- Operating voltage: 9-16 VDC
- Standby power: <0.1W
- Frequency response: 20Hz-20kHz
- Output power at 1% THD-N: 12x 50W RMS @ 4 Ohm
- Output power at 10% THD-N: 12x 80W RMS @ 4 Ohm
- S/N Ratio full power A-: 100dB
- Dynamic range: 100dB
- Max input voltage: high level 32Vpp , RCA 6Vpp
- Max output voltage: high level 28Vpp, RCA 8Vpp
- Input impedance: high level 10 Ohm, RCA 47 kOhm
- System sample rate: 96kHz/24Bit
- Start-up time: <5s
- Inputs: 4xRCA analogue, 1x RCA SPDIF coax, 1x TOSLINK SPDIF, 6x high-level, Bluetooth 5.0 AptX HD module
- Outputs: 12x Speaker level amplified, 12x RCA pre-outs
- Control connections: 1x USB 1.1/2.0, wired remote (DRC)
- 8 full setup presets
- Output signal gain: -40dB to +12dB
- Auto on via high level signal detect or remote input
- Operating temperature: -20~60C
- Storage temperature: -20~85C
- Net weight: 4.2 kg
- Size: 307 x 196 x 50 mm
What's included:
- 1x DSP Amplifier unit
- 5m USB A-B cable
- 1x B5V2 Bluetooth module
- 1x DRC remote control
- 1x DRC remote control cable
- 2x High-level input harnesses
- 2x Speaker output harnesses
- Mounting brackets and fasteners
- 1x Instructions